SAE J49v001
SAE J47v002
SAE J46v001
SAE J45v001
SAE J44v001
SAE J43v001
SAE J38v001
SAE J35v001
SAE J33V002
SAE J30v002
SAE J20V003
SAE J20-2V001
SAE J20-1V001
SAE J19v002
SAE J18V002
SAE J17v001
SAE HS 1417 1996
SAE HS 1417 1996 SAE FLUID SEALING HANDBOOK RADIAL LIP SEALS
SAE HS 806 2001 SAE Oil Filter Test Procedure
SAE AS141011998
SAE AS155301 THRU AS155600A-2007
SAE AS123601 THRU AS123750B-2007
SAE AS122026A THRU AS 122075A-2007 WASHER LOCK, SPRING, CADMIUM PLATED
SAE AS81820C-2008
SAE AS81820-4B-2007
SAE AS81820-2B-2007
SAE AS81820-1B-2007
SAE AS27198A-2008 Seal.Plain.Rubber.(-65 to + 350 Degrees F Fuel Resistant).Mold in Groove
SAE AS27197A-2008 Seal.Plain.Rubber.(Hot Air Resistant 400 Degree F).Mold in Groove
SAE AS27196A-2008 gasket, rubber, fluid resistant,oils, synthetic oils and fuels(-65 to +400 °f), mold in groove
SAE AS27196A-2008 gasket, rubber, fluid resistant,oils, synthetic oils and fuels(-65 to +400 °f), mold in g
SAE AS22759-87b-2007
SAE AS22759-86b-2007
SAE AS15001B-2007 fitting, lubrication, hydraulic, surface check,.250-28 taper threads, steel, type i
SAE AS9716A-2007
SAE AS9359A-2007 (R) nut, castellated, hexagon, silver plated, cres uns s66286, 130 ksi min
SAE AS9101-2006
SAE AS8879D-2004
SAE AS7245A-2007 Inserts, Screw Thread, Helical Coil 19Cr-9.2Ni, Corrosion Resistant Steel,Procurement Specification For
SAE AS7003D-2008 (R)Nadcap Program Requirements
SAE AS5986A-2008 fitting assembly, adapter ring locked port connection to beam seal 4000 psi and 5000 psi
SAE AS5978A-2008 (R) fitting assembly, 45°, female flareless, axially swaged, hydraulic, 5080 psi
SAE AS5976A-2008 (R) fitting assembly, 90°, female flareless, axially swaged, hydraulic, 5080 psi
SAE AS5974A-2008 (R) fitting assembly, straight, female flareless, axially swaged, hydraulic, 5080 psi
SAE AS5951C-2008 Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35,000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems
SAE AS5951C-2008 Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35,000 kPa), 27
SAE AS5716-2010
SAE AS5491C-2007
SAE AS5385B-2004 Cargo Restraint Straps Design Criteria and Testing Methods
SAE AS4536-2008 (R) Safety Cable Kit Procurement Specification and Requirement for Use
SAE AS4373D-2010
SAE AS4059E-2005
SAE AS3215A-2004
SAE AS3088A-2007 (R) stud, straight, key locked, cadmium plated, steel,.3125-24 unJf-3a x .3125-24 unJf-3a
SAE AS3087A-2007 (R) stud straight, key locked,cadmium plated, steel,.250-28 unJf-3a x .250-28 unJf-3a
SAE AS3086A-2007 (R) stud straight, key locked, cadmium plated, steel,1900-32 unJf-3a x .1900-32 unJf-3a
SAE AS1933-1998(R2004)
SAE AS 155001 THRU AS 155300A-2007 STUD, STEPPED, 2 DIA ENGAGEME..
SAE AS 85720A-2008
SAE AS 85421-10C-2008
SAE AS 85421-8A-2008
SAE AS 85049B-2007
SAE AS 85049-90A-2007
SAE AS 85049-27A-A1-2007
SAE AS 85049-18A-2007
SAE AS 39029-46A-2008
SAE AS 39029-5 - 2006-08
SAE AS 22759-89B-2007 Wire, Electrical, Polytetrafluoroethylene-Polyimide Insulated, Normal Weight, Silver Coated, High Strength or Ultra High Strength Copper Alloy, 200-mDC, 600 Volts
SAE AS 17108A-2008 (R) bearing, ball, annular, primarily for aircraft generators and motor-generators, wide cartridge, type ii
SAE AS 17108A-2008 (R) bearing, ball, annular, primarily for aircraft generators and motor-generators, wid
SAE AS 9890A-2007 5000-20 UNJF-3A、CRES UNS S41800
SAE AS 9565C-2007
SAE AS 9556C-2007
SAE AS 9519B-2007
SAE AS 9100C-2009
SAE AS 9100C-2009 Quality Management Systems - Requirements for Aviation, Space and Defense Organizations
SAE AS 9100-2004
SAE AS 8791A-2003 Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin
SAE AS 3087A-2007 STUD - STRAIGHT, KEY LOCKED, CADMIUM PLATED, S..
SAE AS 568B Aerospace Size Standard for O-Rings
SAE AS 568B - 2001 Aerospace Size Standard for O-Rings
SAE ARP-1420_B_Gas Turbine Engine Inlet Flow Distortion Guidelines
SAE ARP823E-2007
SAE ARP 4754-2010
SAE ARP 4148B - 2003-07 Gas Turbine Engine Real Time Performance Model Presentation for Digital Computers
SAE ARP 1200 - 1971 Involute Splines; Wear Limit, Definition
SAE AMS-QQ-S-763B - 2006
SAE AMS-QQ-S-763A-2003
SAE AMS-QQ-S-763-2006
SAE AMS-QQ-A-250A-2004
SAE AMS-QQ-A-250-22B-2007
SAE AMS-QQ-A-250-21B-2007
SAE AMS-QQ-A-250-15B-2007
SAE AMS-QQ-A-250-14A-2007
SAE AMS-QQ-A-250-9A-2006
SAE AMS-QQ-A-200-13B-2007
SAE AMS-M-7866A-2007
SAE AMS-I-23011A-2007
SAE AMS-F-7190A-2007
SAE AMS-F-7190A-2007 Forging, Steel, For Aircraft Aerospace Equipment and Special Ordnance Applications
SAE AMS6454D-2007 Steel, Sheet, Strip, and Plate 1.8Ni 0.80Cr 0.25Mo (0.38 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted
SAE AMS6354F-2007 Steel, Sheet, Strip, and Plate 0.75Si 0.62Cr 0.20Mo 0.10Zr (0.10 0.17C)
SAE AMS5966A-2003 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni 20Cr 20Co 5.9Mo 2.2Ti 0.45AI Consumable Electrode or Vacuum Induction Melted
SAE AMS5966A-2003 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni 20Cr 20Co 5.9Mo 2.2Ti 0.45
SAE AMS5922-2008 Steel, Corrosion-Resistant, Bars, and Forgings 10Cr 5.5Ni 14Co 2Mo 1W (0.19-0.23C)Vacuum Induction Melted, Vacuum Arc Remelted, Normalized, Annealed
SAE AMS5922-2008 Steel, Corrosion-Resistant, Bars, and Forgings 10Cr 5.5Ni 14Co 2Mo 1W (0.19-0.23C)Vacuum
SAE AMS5886B-2003 Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 50Ni 20Cr 20Co 5.8Mo 2.2Ti 0.45Al Consumable Electrode or Vacuum Induction Melted
SAE AMS5886B-2003 Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 50Ni 20Cr 20Co 5.8Mo 2.2Ti 0.45Al Consumable Electrode or Vacuum Induction
SAE AMS5886B-2003 Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 50Ni 20Cr 20Co 5.8Mo 2.2T
SAE AMS5872E-2006
SAE AMS5759-2004
SAE AMS5517L-2010
SAE AMS5513-2009-09
SAE AMS5398F-2006 Steel, Corrosion Resistant, Sand and Centrifugal Castings 16Cr 4.1Ni 0.22(Cb + Ta) 2.8Cu
SAE AMS5398F-2006 Steel, Corrosion Resistant, Sand and Centrifugal Castings 16Cr 4.1Ni 0.22(Cb + Ta) 2.8Cu Solution Heat Treated
SAE AMS5391F-2005 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 73Ni 13Cr 4.5Mo 2.3Cb 0
SAE AMS5391F-2005 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 73Ni 13Cr 4.5Mo 2.3Cb 0.75Ti 6.0Al 0.010B 0.10Zr Vacuum Cast, As-Cast
SAE AMS5390E-2005 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 47.5Ni 22Cr 1.5Co 9Mo 0
SAE AMS5390E-2005 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 47.5Ni 22Cr 1.5Co 9Mo 0.6W 18.5Fe (N-12MV) As-Cast
SAE AMS5383E-2007 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.60Al-18Fe Vacuum Melted
SAE AMS5377F-2004 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 73Ni 12Cr 4.5Mo 2.0Cb 0.70Ti 0.05C 6.0Al 0.010B 0.10Zr, Vacuum Cast, As Cast
SAE AMS5377F-2004 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 73Ni 12Cr 4.5Mo 2.0Cb 0.
SAE AMS5360F-2004
SAE AMS5353D-2007 Steel, Corrosion-Resistant, Investment Castings 16Cr 1.8Ni 0.08N As Cast
SAE AMS5352E-2007 Steel, Corrosion-Resistant, Investment Castings 17Cr 0.55Mo (0.95 1.20C) Annealed
SAE AMS5349D-2007 Steel, Corrosion-Resistant, Investment Castings 13Cr Free Machining; Hardened and Tempered
SAE AMS5225E-2006 Iron-Nickel Alloy, Strip 49Fe 5.3Cr 42Ni 2.5Ti 0.55Al Solution Heat Treated, Cold Rolled
SAE AMS5225E-2006 Iron-Nickel Alloy, Strip 49Fe 5.3Cr 42Ni 2.5Ti 0.55Al Solution Heat Treated, Cold Rolled, 50% Reduction
SAE AMS5221E-2006 Iron-Nickel Alloy Strip 49Fe 5.3Cr 42Ni 2.5Ti 0.55Al Solution Heat Treated
SAE AMS5047F-2007 Steel, Sheet and Strip 0.08 0.13C, Aluminum Killed (SAE 1010) Deep Forming Grade
SAE AMS4982D-2007 Titanium Alloy Wire 44.5 Cb
SAE AMS4975J-2007 Titanium Alloy, Bars, Wire, and Rings 6.0Al 2.0Sn 4.0Zr 2.0Mo 0.08Si Solution and Precipitation Heat Treated
SAE AMS4973F-2008 Titanium Alloy Forgings 8Al-1Mo-1V Solution Heat Treated and Stabilized
SAE AMS4962A-2003 Titanium Alloy, Investment Castings, 6 Al 4 V Hot Isostatically Pressed
SAE AMS4957D-2008 Titanium Alloy.Round Bar and Wire 3AI-8V-6Cr-4Mo-4Zr Consumable Electrode Melted Solution Heat Treated and Cold Drawn
SAE AMS4957D-2008 Titanium Alloy.Round Bar and Wire 3AI-8V-6Cr-4Mo-4Zr Consumable Electrode Melted Solutio
SAE AMS4956E-2008 Titanium Alloy Welding Wire 6Al-4V. Extra Low Interstitial Environment Controlled Packaging
SAE AMS4956E-2008 Titanium Alloy Welding Wire 6Al-4V. Extra Low Interstitial Environment Controlled Packag
SAE AMS4955F-2008 Titanium Alloy, Welding Wire 8AI 1Mo 1V
SAE AMS4954H-2008 Titanium Alloy. Welding Wire 6Al-4V
SAE AMS4942E-2006 Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength
SAE AMS4930F-2006
SAE AMS4921L-2007 Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield Strength
SAE AMS4921K-2006 Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield Strength
SAE AMS4921K-2006 Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield Streng
SAE AMS4911L-2007 Titanium Alloy, Sheet, Strip, and Plate 6AI 4V Annealed
SAE AMS4911K-2007 Titanium Alloy, Sheet, Strip, and Plate 6AI 4V Annealed
SAE AMS4900M-2006
SAE AMS4805E-2007 Bearings, Sintered Metal Powder 89Cu 10Sn Oil Impregnated
SAE AMS4676E-2008
SAE AMS4640G-2005
SAE AMS4500J-2007 Copper, Sheet, Strip, and Plate Soft Annealed
SAE AMS4484K-2007 Magnesium Alloy Castings, Permanent Mold
SAE AMS4416-2008 Aluminum Alloy, Extruded Profiles (2196-T8511) 2.9Cu 1.7Li 0.4Mg 0.4Ag 0.10Zr Solution Heat Treated, Stress Relieved
SAE AMS4416-2008 Aluminum Alloy, Extruded Profiles (2196-T8511) 2.9Cu 1.7Li 0.4Mg 0.4Ag 0.10Zr Solution He
SAE AMS4414-2008 Aluminum Alloy, Hand Forgings 7.5Zn-1.6Cu-1.5Mg- .12Zr (7085-T7452) Solution Heat Treated
SAE AMS4414-2008 Aluminum Alloy, Hand Forgings 7.5Zn-1.6Cu-1.5Mg- .12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged
SAE AMS4413-2007 Aluminum Alloy, Plate (2052-T84) 3.5 Cu 1.0Li .40Mg .35Mn .45Ag 0.12Zr Solution Heat Treated, Stress Relieved, and Artificially Aged
SAE AMS4412-2007 Aluminum Alloy, Sheet, 3.2Cu 0.52Mg 0.30Ag 0.12Zr (2198-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4405-2006 Aluminum Alloy, Alclad Sheet (6156-T4) 1.0Si 0.90Cu 0.60Mn 0.90Mg Solution Heat Treated and Naturally Aged
SAE AMS4405-2006 Aluminum Alloy, Alclad Sheet (6156-T4) 1.0Si 0.90Cu 0.60Mn 0.90Mg Solution Heat Treated a
SAE AMS4404A-2008 Aluminum Alloy, Extruded Profiles
SAE AMS4404A-2008 Aluminum Alloy, Extruded Profiles (6056-T4511) 1.0Si – 0.90Mg – 0.80Cu – 0.60Mn – 0.40Zn Solution Heat Treated and Stress-Relieved by Stretching
SAE AMS4382D-2006 Magnesium Alloy, Plate, Extra Flat 3.0Al – 1.0Zn – 0.20Mn (AZ31B-0) Annealed
SAE AMS4341E-2006 Aluminum Alloy, Extrusions 6.2Zn 2.3Cu 2.2Mg 0.12Zr (7050-T73511)Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
SAE AMS4341E-2006 Aluminum Alloy, Extrusions 6.2Zn 2.3Cu 2.2Mg 0.12Zr (7050-T73511)Solution Heat Treated,
SAE AMS4340E-2006
SAE AMS4337A-2006
SAE AMS4336A-2003 Aluminum Alloy, Extruded Rod, Bar, and Profiles (7055-T76511) 8.0Zn 2.3Cu 2.0Mg 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged
SAE AMS4336A-2003 Aluminum Alloy, Extruded Rod, Bar, and Profiles (7055-T76511) 8.0Zn 2.3Cu 2.0Mg 0.16Zr S
SAE AMS4328A-2006 Aluminum Alloy, Plate (2397-T87)2.8Cu 1.4Li 0.30Mn 0.12Zr 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged
SAE AMS4328A-2006 Aluminum Alloy, Plate (2397-T87)2.8Cu 1.4Li 0.30Mn 0.12Zr 0.10Zn Solution Heat Treated,
SAE AMS4327-2003 Aluminum Alloy, Plate (2098-O)3.5Cu 1.1Li 0.50Mg 0.40Ag 0.11Zr Annealed
SAE AMS4298-2004 Aluminum Alloy, Alclad Sheet 3.8Cu 1.0Mg 0.30Mn 0.60Zn (Alclad 2056-T3) Solution Heat Treated and Cold Worked
SAE AMS4298-2004 Aluminum Alloy, Alclad Sheet 3.8Cu 1.0Mg 0.30Mn 0.60Zn (Alclad 2056-T3) Solution Heat Tre
SAE AMS4279B-2006
SAE AMS4206A-2006
SAE AMS4124D-2005 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T7351) Solution Heat Treated
SAE AMS4124D-2005 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7
SAE AMS4064F-2008 Aluminum Alloy.Clad Two Sides Sheet 1.25Mn- 0.12Cu (No. 12-0 Brazing Sheet) Annealed
SAE AMS4027N-2008
SAE AMS4025L-2008
SAE AMS3278A-2008 Sealing and Coating Compound Polyurethane (PUR) Fuel Resistant High Tensile Strength
SAE AMS3252J-2008 Synthetic Rubber and Cork Composition General Purpose Firm
SAE AMS3250J-2008 Synthetic Rubber and Cork Composition General Purpose Soft
SAE AMS2771C-2004
SAE AMS2750D-2005
SAE AMS2647C-2009
SAE AMS2644E-2006
SAE AMS2448-2004
SAE AMS2430-1948-09(R2010-01) Shot Peening, Automatic
SAE AMS2430 REV. R Issued 1948-09 Revised-2010-01 Shot+Peening,+Automatic
SAE AMS2404E-2003 Plating, Electroless Nickel
SAE AMS2269F-2006
SAE AMS2248G-1960(R2011)
SAE AMS1424H-2007 (R) Deicing∕Anti-Icing Fluid, Aircraft SAE Type I
SAE AMS C-5541A-2003
SAE AMS 27597A - 2006-02
SAE AMS 6417F-2006
SAE AMS 6415S-2007
SAE AMS 6354F-2007
SAE AMS 6267G-2007
SAE AMS 6260P-2007
SAE AMS 5922-2008
SAE AMS 5732J-2006
SAE AMS 5678F-2002(2007)
SAE AMS 5659L
SAE AMS 5659L - 2004-01
SAE AMS 5651J 1948 Revised 2003 (R2007)
SAE AMS 5651-2007
SAE AMS 5612J-2007
SAE AMS 5510S-2008
SAE AMS 5355J-2009
SAE AMS 5225E-2006
SAE AMS 5085G-2008 Steel Sheet. Strip. and Plate 0.47-0.55C (SAE 1050) Annealed
SAE AMS 4979F-2008
SAE AMS 4967-2006
SAE AMS 4963B-2008
SAE AMS 4958C-2008
SAE AMS 4944G-2006 Titanium Alloy Tubing. Seamless. Hydraulic 3.0Al-2.5V Cold Worked. Stress Relieved
SAE AMS 4943H-2008
SAE AMS 4931C-2007
SAE AMS 4928R-2007
SAE AMS 4918L-2006
SAE AMS 4775H-2005
SAE AMS 4640G-2005
SAE AMS 4393 - 2010-10
SAE AMS 4342E-2007
SAE AMS 4287A-2007
SAE AMS 4211B-2007
SAE AMS 4157D - 2007
SAE AMS 4152M-2007
SAE AMS 4147D-2007
SAE AMS 4111D-2007 Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated
SAE AMS 4111D-2007 Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipit
SAE AMS 3278A-2008
SAE AMS 3044F-2008
SAE AMS 2819B-2008
SAE AMS 2804C-2001(R2006)
SAE AMS 2772E-2008
SAE AMS 2769-2009-12
SAE AMS 2631B-1995(2007) Aerospace Material Specification
SAE AMS 2469H-2008
SAE AMS 2418G-2006
SAE AMS 2355H-2005
SAE AMS 2269F-2006
SAE AMS 2249F-2005
SAE AMS 2248-2011
SAE AMS 2242F-2006
SAE AMS 2241R-1945(2007)
SAE AMS 2241R - 2007-07
SAE AMS 2154-2005
SAE AMS 1426C-1993 Fluid, DeicingAnti-Icing, Runways and Taxiways Glycol Base
SAE AIR3260-2006 Identification of Standard Utility Parts Bolts and Nuts
SAE AIR 5120-2006 Engine Monitoring System Reliability and Validity
SAE J1305v001
SAE J1289v001
SAE J1078v001
SAE J1028V002
SAE J987v001
SAE J983V002
SAE J959v001
SAE J881v001
SAE J765v001
SAE J376v001
SAE USCAR 13-1999 STANDARD FOR IN-TANK ELECTRIC FUEL PUMPS
SAE USCAR 12꞉2001 (EN)
SAE USCAR 12꞉2001 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE Technical 1999-01-0292- Achieving AGMA 10 Quality Level for Automotive Gear Applications
SAE SAFETY ELEMENT OUT OF CONTEXT
SAE J4002-2004 H-Point Machine (HPM-II) Specifications and Procedure
sae j2909v001
SAE J2884-2009
SAE J2847-1 2010 Communication between Plug-in Vehicles and the Utility Grid
SAE J2841 2009(R2010) Utility Factor Definitions for Plug-In Hybrid Electric Vehicles Using Travel Survey Data
SAE J2841 2009(R2010) Utility Factor Definitions for Plug-In Hybrid Electric Vehicles Using Travel Survey
SAE J2836-1 2010-04 Use Cases for Communication Between Plug-in Vehicles and the Utility Grid
SAE J2788 2006(R2010) Use Cases for Communication Between Plug-in Vehicles and the Utility Grid
SAE J2740-2005
SAE J2727-2008 HFC 134a Mobile Air Conditioning System Refrigerant Emission Chart
SAE J2723-2007
SAE J2716-2010
SAE J2679-2004
SAE J2678-2004
SAE J2675-2004
SAE J2673-2004
SAE J2672-2004 Reduced Effort Power
SAE J2658꞉2003 (EN)
SAE J2658꞉2003 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2658-2010
SAE J2656꞉2003 (EN)
SAE J2656꞉2003 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2655꞉2003 (EN)
SAE J2655꞉2003 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2642-2005
SAE J2638꞉2003 (EN)
SAE J2638꞉2003 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2613꞉2002 (EN)
SAE J2613꞉2002 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2613-2002 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic
SAE J2610꞉2002 (EN)
SAE J2610꞉2002 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2609꞉2003 (EN)
SAE J2609꞉2003 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2602-2 2005-09
SAE J2602-1 2005
SAE J2599-2002 Fuel Filler Pipe Assembly Design Practice to Meet Low Evaporative
SAE J2587
SAE J2583-2002 Directional Drilling Planning and Mapping Nomenclature
SAE J2582꞉2001 (EN)
SAE J2582꞉2001 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2579-2009
SAE J2578-2009
SAE J2564-2000 Automotive Stability Enhancement Systems
SAE J2562v001
SAE J2562-2003
SAE J2544-2000 Plug-In Relay Test Methods
SAE J2539꞉2002 (EN)
SAE J2539꞉2002 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2534-2002 Recommended Practice for Pass-Thru Vehicle Programming
SAE J2530-2004
SAE J2527-2004_Performance_Based_Standard_for_Accelerated_Exposure_of_Automotive
SAE J2525꞉2000 (EN)
SAE J2525꞉2000 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2521-2006
SAE J2515꞉1999 (EN)
SAE J2515꞉1999 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2512꞉1999 (EN)
SAE J2512꞉1999 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2501꞉2001 (EN)
SAE J2501꞉2001 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2489꞉2000 (EN)
SAE J2489꞉2000 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2484꞉2002 (EN)
SAE J2484꞉2002 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2470-2009
SAE J2464 1999(R2009) Electric and Hybrid Electric Vehicle Rechargeable Enery Storage System (RESS) Safety
SAE J2464 1999(R2009) Electric and Hybrid Electric Vehicle Rechargeable Enery Storage System (RESS) Safety and Abuse Testing
SAE J2414-2005
SAE J2412-2003_Accelerated_Exposure_of_Automotive_Interior_Trim_Components_Using
SAE J2412-2003
SAE J2384-2006
SAE J2380 1998(R2009) Vibration Testing of Electric Vehicle Batteries
SAE J2344 1998(R2010) Guidelines for Electric Vehicle Safety
SAE J2334
SAE J2295꞉1998 (EN)
SAE J2293-2 1997(R2008) Energy Transfer System for Electric Vehicles Part 2 Communication Requirements and
SAE J2293-2 1997(R2008) Energy Transfer System for Electric Vehicles Part 2 Communication Requirements and Network Architecture
SAE J2293-1 1997(R2008) Energy Transfer System for Electric Vehicles Part 1 Functional requirements and System Architectures
SAE J2293-1 1997(R2008) Energy Transfer System for Electric Vehicles Part 1 Functional requirements and Sy
SAE J2289 2000(R2008) Electric Drive Battery Pack System Functional Guidelines
SAE J2288 1997(R2008) Life Cycle Testing of Electric Vehicle Battery Modules
SAE J2283-2005
SAE J2244-2꞉1991 ISO 6149-2 (EN)
SAE J2244-2꞉1991 ISO 6149-2 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2244-1꞉1991 ISO 6149-1 (EN)
SAE J2244-1꞉1991 ISO 6149-1 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2213v001-METRIC BALL JOINTS
SAE J2192꞉2005 (EN)
SAE J2192꞉2005 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2192-2005 Recommended Testing Methods For Physical Protection Of Wiring Harnesses
SAE J2178꞉1994 - Class B Part 4 - Draft (EN)
SAE J2178꞉1994 - Class B Part 4 - Draft (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2178꞉1994 - Class B Part 2 - Draft (EN)
SAE J2178꞉1994 - Class B Part 2 - Draft (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2178꞉1994 - Class B Part 1 - Draft (EN)
SAE J2178꞉1994 - Class B Part 1 - Draft (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2178-4꞉1999 (EN)
SAE J2178-4꞉1999 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2178-3꞉1999 (EN)
SAE J2178-3꞉1999 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2178-2꞉1999 (EN)
SAE J2178-2꞉1999 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2178-1꞉1999 (EN)
SAE J2178-1꞉1999 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2118-2006 Braking Performance Asphalt Pavers
SAE J2064-2003
SAE J2064
SAE J2057-2006
SAE J2030꞉2002 (EN)
SAE J2030꞉2002 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J2028v001-FRONT -WHEEL-DRIVE CONSTANT VELOCITY JOINT BOOT SEALS
SAE J2028
SAE J2012꞉2002 ISO 15032-6꞉2002 (EN)
SAE J2012꞉2002 ISO 15032-6꞉2002 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J1994-2008
SAE J1979꞉2002 ISO DIS 15031-5꞉2002 (EN)
SAE J1979꞉2002 ISO DIS 15031-5꞉2002 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J1979-2007 (R) E∕E Diagnostic Test Modes
SAE J1978꞉2002 ISO DIS 15031-4꞉2001 (EN)
SAE J1978꞉2002 ISO DIS 15031-4꞉2001 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J1962꞉2002 ISO DIS 15031-3꞉2001 (EN)
SAE J1962꞉2002 ISO DIS 15031-3꞉2001 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J1960-2004-E.rar
SAE J1939꞉2007 (EN)
SAE J1939꞉2007 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J1939꞉1999 IS1377-9804 (EN)
SAE J1939꞉1999 IS1377-9804 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ
SAE J1939꞉1999 A1 (EN)
SAE J1939꞉1999 A1 (EN) ᴾᴼᴼᴮᴸᴵᶜᴽ