BS EN 14305-2009 + A1-2013

BS EN 143052009 ICS 91.100.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Thermal insulation products for building equipment and industrial installations Factory made cellular glass CG products Specification A12013National foreword This British Standard is the UK implementation of EN 143052009A12013. It supersedes BS EN 143052009, which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by . The UK participation in its preparation was entrusted by Technical Committee B/540, Energy perance of materials, components and buildings, to Subcommittee B/540/6, Fibrous and inorganic thermal insulation materials. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 143052009A12013 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2010 The British Standards Institution 2013. Published by BSI Standards Limited 2013 Amendments/corrigenda issued since publication Date Comments 30 April 2013 Implementation of CEN amendment A12013 ISBN 978 0 580 78180 3 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 143052009A1 January 2013 ICS 91.100.60 Supersedes EN 143052009 English Version Thermal insulation products for building equipment and industrial installations - Factory made cellular glass CG products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en verre cellulaire CG - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Schaumglas CG - Spezifikation This European Standard was approved by CEN on 29 September 2009 and includes Amendment 1 approved by CEN on 11 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions English, French, German. A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, er Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any and by any means reserved worldwide for CEN national Members. Ref. No. EN 143052009A12013 EEN 143052009A12013 E 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .8 4 Requirements 11 5 Test s . 18 6 Designation code 22 7 uation of conity 23 8 Marking and labelling . 23 Annex A normative Factory production control . 25 Annex B inative Determination of minimum service temperature 29 Annex C inative Additional properties . 33 Annex D inative Preparation of the flat test specimens to measure thermal conductivity 35 Annex ZA inative Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 36 Bibliography . 44 Figure Figure ZA.1 Example of CE marking ination 43 Tables Table 1 Dimensional tolerances 12 Table 2 Dimensional stability under specified conditions 13 Table 3 Levels for compressive strength . 15 Table 4 Levels for bending strength . 16 Table 5 Levels for deation under point load . 16 Table 6 Test s, test specimens and conditions. 20 Table A.1 Minimum product testing frequencies . 25 Table A.2 Minimum product testing frequencies for the reaction to fire of the product as placed on the market . 27 Table C.1 Test s, test specimens, conditions and minimum testing frequencies . 34 Table ZA. 1 Relevant clauses . 37 BS EN 143052009A12013EN 143052009A12013 E 3 Table ZA.2 Systems of attestation of conity . 38 Table ZA.3 Assignment of uation of conity tasks for products under system 1 . 39 Table ZA.4 Assignment of uation of conity tasks for products as placed on the market under system 3 or system 3 combined with system 4 for reaction to fire . 40 BS EN 143052009A12013EN 143052009A12013 E 4 Foreword This document EN 143052009A12013 has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 143052009. This document includes Amendment 1 approved by CEN on 2012-11-11. The start and finish of text introduced or altered by amendment is indicated in the text by tags “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive 89/106/EEC, see inative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains four anns Annex A normative, Factory production control Annex B inative, Determination of minimum service temperature Annex C inative, Additional properties Annex D inative, Preparation of the flat test specimens to measure thermal conductivity Annex ZA inative, Clauses of this European Standard addressing the provisions of the EU Construction Products Directive This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 21 months after availability as the date of withdrawal dow of national standards which conflict with the European Standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88 BS EN 143052009A12013EN 143052009A12013 E 5 EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool MW products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam FEF products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass CG products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate CS products Specification EN 14307,Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam XPS products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam PUR and polyisocyanurate foam PIR products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene EPS Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam PEF products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam PF products Specification According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, er Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 143052009A12013EN 143052009A12013 E 6 1 Scope This European Standard specifies the requirements for factory made cellular glass products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately - 265 C to 430 C. NOTE Below an operating temperature of - 50 C, special tests regarding the suitability of the product in the intended application are advised e.g. liquefaction of oxygen. Manufacturers advice should be heeded in all cases. The products are manufactured in the of faced or unfaced boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, uation of conity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the perance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,065 W/mK at 10 C are not covered by this standard. This standard does not cover products for the insulation of the building structure. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document including any amendments applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 8261996, Thermal insulating products for building applications Determination of compression behaviour EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications Determination of tensile strength parallel to faces BS EN 143052009A12013EN 143052009A12013 E 7 EN 1609, Thermal insulating products for building applications Determination of short term water absorption by partial immersion EN 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications Determination of long term water absorption by immersion EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12430, Thermal insulating products for building applications Determination of behaviour under point load EN 12667, Thermal perance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter s Products of high and medium thermal resistance EN 12939, Thermal perance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter s Thick products of high and medium thermal resistance EN 13172, Thermal insulating products uation of conity EN 13467, Thermal insulating products for building equipment and industrial installations Determination of dimensions, squareness and linearity of preed pipe insulation EN 13468, Thermal insulating products for building equipment and industrial installations Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH EN 13472, Thermal insulating products for building equipment and industrial installations Determination of short term water absorption by partial immersion of preed pipe insulation EN 13501-12007, Fire classification of construction products and building elements Part 1 Classification using test data from reaction to fire test EN 13820, Thermal insulating materials for building applications Determination of organic content EN 13823, Reaction to fire tests for building products Building