BS EN1503-4-2016

收藏

编号:20181128223932925173    类型:共享资源    大小:1.65MB    格式:PDF    上传时间:2018-12-05
  
30
Gold
关 键 词:
BSEN1503 2016
资源描述:
BS EN 1503-4:2016 Valves — Materials for bodies, bonnets and covers Part 4: Copper alloys specified in European Standards BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 1503-4:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 1503-4:2016. It supersedes BS EN 1503-4:2002 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PSE/18/1, Industrial valves, steam traps, actuators and safety devices against excessive pressure - Valves - Basic standards. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. © The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 89952 2 ICS 23.060.01; 77.120.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2016. Amendments issued since publication Date Text affectedBS EN 1503-4:2016EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 1503-4 February 2016 ICS 23.060.01; 77.120.30 Supersedes EN 1503-4:2002 English Version Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards Appareils de robinetterie - Matériaux pour les corps, chapeaux et couvercles - Partie 4: Alliages de cuivre spécifiés dans les Normes Européennes Armaturen - Werkstoffe für Gehäuse, Oberteile und Deckel - Teil 4: Kupferlegierungen, die in Europäischen Normen festgelegt sind This European Standard was approved by CEN on 15 December 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels © 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1503-4:2016 EBS EN 1503-4:2016 EN 1503-4:2016 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Materials . 4 3.1 General 4 3.2 Group 1 materials . 4 3.3 Group 2 materials . 4 BS EN 1503-4:2016 EN 1503-4:2016 (E) 3 European foreword This document (EN 1503-4:2016) has been prepared by Technical Committee CEN/TC 69 “Industrial valves”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2016, and conflicting national standards shall be withdrawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1503-4:2002. The main changes compared to the previous edition are: a) Clause 2 “Normative references” has been updated; b) Table 1 has been deleted and therefore a reference to EN 12516-4:2014, Table 8 has been added; c) material “CuSn5Zn5Pb2-C” has been added to Table 1; d) the Bibliography has been deleted. EN 1503, Valves — Materials for bodies, bonnets and covers consists of four parts: — Part 1: Steels specified in European Standards — Part 2: Steels other than those specified in European Standards — Part 3: Cast Irons specified in European Standards — Part 4: Copper alloys specified in European Standards According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1503-4:2016 EN 1503-4:2016 (E) 4 1 Scope This European Standard lists copper alloys for pressure containing valve bodies, bonnets and covers which are specified in European Standards. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1982, Copper and copper alloys — Ingots and castings EN 12163, Copper and copper alloys — Rod for general purposes EN 12164, Copper and copper alloys — Rod for free machining purposes EN 12167, Copper and copper alloys — Profiles and bars for general purposes EN 12168, Copper and copper alloys — Hollow rod for free machining purposes EN 12420, Copper and copper alloys — Forgings EN 12449, Copper and copper alloys — Seamless, round tubes for general purposes EN 12516-4:2014, Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel 3 Materials 3.1 General The materials shall be as given in 3.2 and 3.3. The selection of materials should take account of the intended use and all reasonably foreseeable operation conditions. Selecting materials from Group 1 will provide some assurance of their suitability for valve bodies, bonnets and covers, whereas selecting from Group 2 will not provide the same assurance. Due consideration should be given to all reasonably foreseeable degradation mechanism (e.g. corrosion, creep, fatigue) that may occur in some applications. 3.2 Group 1 materials EN 12516-4:2014, Table 8, lists copper alloys specified in European material standards which have been in regular use for valve bodies, bonnets and covers. 3.3 Group 2 materials Table 1 lists copper alloys specified in European material standards that may be used for valve bodies, bonnets and covers. BS EN 1503-4:2016 EN 1503-4:2016 (E) 5 Table 1 — Group 2 materials Type of alloy Material designation Material/form to be selected from: Symbol Number EN 1982 EN 12163 EN 12164 EN 12167 EN 12168 EN 12420 EN 12449 Copper-aluminium alloys CuAl6Si2Fe CW301G X X X CuAl7Si2 CW302G X X X CuAl8Fe3 CW303G X CuAl10Fe3Mn2 CW306G X X X CuAl10Ni5Fe4 CW307G X X X CuAl10Ni3Fe2-C CC332G X Copper-nickel alloys CuNi10Fe1Mn CW352H X X X CuNi30Mn1Fe CW354H X X X CuNi10Fe1Mn1-C CC380H X CuNi30Fe1Mn1-C CC381H X Copper-tin alloys CuSn10-C CC480K X CuSn12-C CC483K X CuSn12Ni2-C CC484K X CuSn5Zn5Pb2-C CC499K X Copper-zinc alloys CuZn37 CW508L X X X X CuZn40 CW509L X X X X Copper-zinc-lead alloys CuZn35Pb2 CW601N X X X X CuZn36Pb3 CW603N X X X X CuZn38Pb2 CW608N X X X X X CuZn38Pb4 CW609N X X X CuZn39Pb0,5 CW610N X X X CuZn39Pb2 CW612N X X X X CuZn39Pb2Sn CW613N X X CuZn39Pb3Sn CW615N X CuZn40Pb2Sn CW619N X X Complex copper-zinc alloys CuZn37Mn3Al2PbSi CW713R X X X X X CuZn39Sn1 CW719R X X X CuZn40Mn1Pb1AlFeSn CW721R X X X X CuZn40Mn1Pb1FeSn CW722R X X X X CuZn35Pb2Al-C CC752S X CuZn37Pb2Ni1AlFe-C CC753S X CuZn34Mn3Al2Fe1-C CC764S X CuZn35Mn2Al1Fe1-C CC765S X CuZn37Al1-C CC766S X CuZn38Al-C CC767S X This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services. BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited. British Standards Institution (BSI) About us We bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions. The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals. Information on standards We can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at bsigroup.com/standards or contacting our Customer Services team or Knowledge Centre. Buying standards You can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at bsigroup.com/shop, where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team. Copyright in BSI publications All the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSI’s prior written consent. Storing and using standards Standards purchased in soft copy format: • A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. • The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. • A single paper copy may be printed for personal or internal company use only. Standards purchased in hard copy format: • A British Standard purchased in hard copy format is for personal or internal company use only. • It may not be further reproduced – in any format – to create an additional copy. This includes scanning of the document. If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see ‘Subscriptions’). Reproducing extracts For permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team. Subscriptions Our range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to bsigroup.com/subscriptions. With British Standards Online (BSOL) you’ll have instant access to over 55,000 British and adopted European and international standards from your desktop. It’s available 24/7 and is refreshed daily so you’ll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when they’re revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit bsigroup.com/shop. With a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as they’re available, you can be sure your documentation is current. For further information, email subscriptions@bsigroup.com. Revisions Our British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre. Useful Contacts Customer Services Tel: +44 345 086 9001 Email (orders): orders@bsigroup.com Email (enquiries): cservices@bsigroup.com Subscriptions Tel: +44 345 086 9001 Email: subscriptions@bsigroup.com Knowledge Centre Tel: +44 20 8996 7004 Email: knowledgecentre@bsigroup.com Copyright & Licensing Tel: +44 20 8996 7070 Email: copyright@bsigroup.com NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK BSI Back Cover.indd 1 27/01/2016 14:20
展开阅读全文
  标准图书馆所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。
0条评论

还可以输入200字符

暂无评论,赶快抢占沙发吧。

关于本文
本文标题:BS EN1503-4-2016
链接地址:http://www.stdlibrary.com/p-168089.html
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服客服 - 联系我们

@copyright 2017-Stdlibrary All Rights Reserved. ( 浙ICP备17013498号-1 )


收起
展开